BLUE SEA SYSTEMS m-Series Mini Selector Battery Switch with Removable Knob
Mfg # 6007
Model # 8646291
A compact battery switch that offers multiple installation options. Switches isolated battery banks to all loads or combines battery banks to all loads.
Blue Sea Systems m-Series battery switches are ideal for outboard and small inboard boats. M-Series switches are ignition-protected and safe for use in engine rooms of gasoline-powered boats. Because they are waterproof, offer three mounting options and are just 2-7/8" square.
m-Series switches will fit almost anywhere. One piece tin plated copper terminal studs are 7/8" long and will handle multiple cables and the high torque loads required to maximize contact and minimize resistance. The case design allows cables to be run from every direction through knock-out panels in each side. Tactile textures on the face let you know the knob position by feel. The knob is removable to add another level of security and provide a service lock-out for safety.
Features:
Provides an emergency combine feature to draw power from both batteries for starting or radio calls
Compact design makes installation in tight places easy
Three mounting options; can be installed on the surface, flush or the rear of the panel
Make before break feature allows switching between battery banks without interrupting power
Ignition protected and can be mounted in the engine room of gasoline powered boats
Removable knob for added security and provides service lock-out for safety
Corrosion resistant one piece tin plated copper studs are 7/8” long and accept multiple cables and accept high torque loads
Tactile textures on face let operate the switch in low or no light
Snap-out isolator covers and labels included
Lifetime warranty
Specifics:
Switch Positions: 4
Battery Combine: Yes
Alternator Field Disconnect: No
Maximum Voltage: 32V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5min)
Cranking Rating (30Sec): 900A
Battery Inputs: 2
Cable Size to meet ratings: 4/0 AWG
Mounting Holes: ¼”
Terminal Stud size: 3/8”
Details:
Amperage: 300 Amps
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500, SAE J1171, CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: 5 Years
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 6007
Model # 8646291
A compact battery switch that offers multiple installation options. Switches isolated battery banks to all loads or combines battery banks to all loads.
Blue Sea Systems m-Series battery switches are ideal for outboard and small inboard boats. M-Series switches are ignition-protected and safe for use in engine rooms of gasoline-powered boats. Because they are waterproof, offer three mounting options and are just 2-7/8" square.
m-Series switches will fit almost anywhere. One piece tin plated copper terminal studs are 7/8" long and will handle multiple cables and the high torque loads required to maximize contact and minimize resistance. The case design allows cables to be run from every direction through knock-out panels in each side. Tactile textures on the face let you know the knob position by feel. The knob is removable to add another level of security and provide a service lock-out for safety.
Features:
Provides an emergency combine feature to draw power from both batteries for starting or radio calls
Compact design makes installation in tight places easy
Three mounting options; can be installed on the surface, flush or the rear of the panel
Make before break feature allows switching between battery banks without interrupting power
Ignition protected and can be mounted in the engine room of gasoline powered boats
Removable knob for added security and provides service lock-out for safety
Corrosion resistant one piece tin plated copper studs are 7/8” long and accept multiple cables and accept high torque loads
Tactile textures on face let operate the switch in low or no light
Snap-out isolator covers and labels included
Lifetime warranty
Specifics:
Switch Positions: 4
Battery Combine: Yes
Alternator Field Disconnect: No
Maximum Voltage: 32V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5min)
Cranking Rating (30Sec): 900A
Battery Inputs: 2
Cable Size to meet ratings: 4/0 AWG
Mounting Holes: ¼”
Terminal Stud size: 3/8”
Details:
Amperage: 300 Amps
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500, SAE J1171, CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: 5 Years
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 6007
Model # 8646291
A compact battery switch that offers multiple installation options. Switches isolated battery banks to all loads or combines battery banks to all loads.
Blue Sea Systems m-Series battery switches are ideal for outboard and small inboard boats. M-Series switches are ignition-protected and safe for use in engine rooms of gasoline-powered boats. Because they are waterproof, offer three mounting options and are just 2-7/8" square.
m-Series switches will fit almost anywhere. One piece tin plated copper terminal studs are 7/8" long and will handle multiple cables and the high torque loads required to maximize contact and minimize resistance. The case design allows cables to be run from every direction through knock-out panels in each side. Tactile textures on the face let you know the knob position by feel. The knob is removable to add another level of security and provide a service lock-out for safety.
Features:
Provides an emergency combine feature to draw power from both batteries for starting or radio calls
Compact design makes installation in tight places easy
Three mounting options; can be installed on the surface, flush or the rear of the panel
Make before break feature allows switching between battery banks without interrupting power
Ignition protected and can be mounted in the engine room of gasoline powered boats
Removable knob for added security and provides service lock-out for safety
Corrosion resistant one piece tin plated copper studs are 7/8” long and accept multiple cables and accept high torque loads
Tactile textures on face let operate the switch in low or no light
Snap-out isolator covers and labels included
Lifetime warranty
Specifics:
Switch Positions: 4
Battery Combine: Yes
Alternator Field Disconnect: No
Maximum Voltage: 32V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5min)
Cranking Rating (30Sec): 900A
Battery Inputs: 2
Cable Size to meet ratings: 4/0 AWG
Mounting Holes: ¼”
Terminal Stud size: 3/8”
Details:
Amperage: 300 Amps
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500, SAE J1171, CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: 5 Years
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
