BLUE SEA SYSTEMS m-Series Mini Single Circuit ON/OFF Battery Switch with Removable Knob
Mfg # 6006
Model # 7808835
A compact battery switch that offers multiple installation options. Switches a single battery to a single load group.
Blue Sea Systems m-Series battery switches are compact and waterproof and can be installed almost anywhere. The small footprint and three mounting options make installation easy. M-Series switches are ignition protected and can be located in the engine rooms of gasoline powered boats.
The tactile texture of its face and removable knob makes operation in low light easier. Being removable, the knob adds a level of security and will prevent accidental power flow while servicing the electrical system. One piece tin-plated copper terminal studs are long enough to accept multiple cables and will accept the torque required to create a secure connection that minimizes resistance. For a small versatile battery switch that is easy to install and use, look no further than the m-Series from Blue Sea Systems.
Features:
Compact design makes installation in tight places easy
Multiple mounting options; can be installed on the surface, rear, or front of the panel
Battery On-Off switch with removable knob provides added safety to prevent accidental or unwanted current in the DC system; this is handy during electrical system repairs
Ignition protected and can be mounted in the engine room of gasoline powered boats
One piece tin-plated copper studs are 7/8”long and accept multiple cables
Tactile textures on face let you operate the switch in low or no light
Knock out isolator covers and labels included
Waterproof; rated IP66, protected against dust and strong jets of water (for use on ship decks).
Specifics:
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect: no
Maximum Voltage: 48V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5 min)
Cranking Rating (30Sec): 900A
Battery Inputs: 1
Cable Size to meet ratings: 4/0AWG
Mounting Holes: # 10 Screws
Terminal Stud size: 3/8”
Dimensions: 2 13/16”L x 2 13/16”W x 3 1/16”H
Weight: .65 Lb.
Approvals: ABYC, UL 1107, UL 1500 and SAE J1171
Details:
Amperage: 300 Amps at 48 Volts DC
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500,SAE J1171,CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: Lifetime
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 6006
Model # 7808835
A compact battery switch that offers multiple installation options. Switches a single battery to a single load group.
Blue Sea Systems m-Series battery switches are compact and waterproof and can be installed almost anywhere. The small footprint and three mounting options make installation easy. M-Series switches are ignition protected and can be located in the engine rooms of gasoline powered boats.
The tactile texture of its face and removable knob makes operation in low light easier. Being removable, the knob adds a level of security and will prevent accidental power flow while servicing the electrical system. One piece tin-plated copper terminal studs are long enough to accept multiple cables and will accept the torque required to create a secure connection that minimizes resistance. For a small versatile battery switch that is easy to install and use, look no further than the m-Series from Blue Sea Systems.
Features:
Compact design makes installation in tight places easy
Multiple mounting options; can be installed on the surface, rear, or front of the panel
Battery On-Off switch with removable knob provides added safety to prevent accidental or unwanted current in the DC system; this is handy during electrical system repairs
Ignition protected and can be mounted in the engine room of gasoline powered boats
One piece tin-plated copper studs are 7/8”long and accept multiple cables
Tactile textures on face let you operate the switch in low or no light
Knock out isolator covers and labels included
Waterproof; rated IP66, protected against dust and strong jets of water (for use on ship decks).
Specifics:
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect: no
Maximum Voltage: 48V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5 min)
Cranking Rating (30Sec): 900A
Battery Inputs: 1
Cable Size to meet ratings: 4/0AWG
Mounting Holes: # 10 Screws
Terminal Stud size: 3/8”
Dimensions: 2 13/16”L x 2 13/16”W x 3 1/16”H
Weight: .65 Lb.
Approvals: ABYC, UL 1107, UL 1500 and SAE J1171
Details:
Amperage: 300 Amps at 48 Volts DC
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500,SAE J1171,CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: Lifetime
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 6006
Model # 7808835
A compact battery switch that offers multiple installation options. Switches a single battery to a single load group.
Blue Sea Systems m-Series battery switches are compact and waterproof and can be installed almost anywhere. The small footprint and three mounting options make installation easy. M-Series switches are ignition protected and can be located in the engine rooms of gasoline powered boats.
The tactile texture of its face and removable knob makes operation in low light easier. Being removable, the knob adds a level of security and will prevent accidental power flow while servicing the electrical system. One piece tin-plated copper terminal studs are long enough to accept multiple cables and will accept the torque required to create a secure connection that minimizes resistance. For a small versatile battery switch that is easy to install and use, look no further than the m-Series from Blue Sea Systems.
Features:
Compact design makes installation in tight places easy
Multiple mounting options; can be installed on the surface, rear, or front of the panel
Battery On-Off switch with removable knob provides added safety to prevent accidental or unwanted current in the DC system; this is handy during electrical system repairs
Ignition protected and can be mounted in the engine room of gasoline powered boats
One piece tin-plated copper studs are 7/8”long and accept multiple cables
Tactile textures on face let you operate the switch in low or no light
Knock out isolator covers and labels included
Waterproof; rated IP66, protected against dust and strong jets of water (for use on ship decks).
Specifics:
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect: no
Maximum Voltage: 48V
Continuous Rating: 300A
Intermittent Rating (duration): 500A (5 min)
Cranking Rating (30Sec): 900A
Battery Inputs: 1
Cable Size to meet ratings: 4/0AWG
Mounting Holes: # 10 Screws
Terminal Stud size: 3/8”
Dimensions: 2 13/16”L x 2 13/16”W x 3 1/16”H
Weight: .65 Lb.
Approvals: ABYC, UL 1107, UL 1500 and SAE J1171
Details:
Amperage: 300 Amps at 48 Volts DC
Cold Cranking Amps: 1500 Amps
Color: Red
Dimensions: 2 7/8" Length x 2 7/8" Width x 3" Height
ISO Approved: UL Listed. Meets UL 1500,SAE J1171,CE
Type: On/Off Switches
Voltage: 48 Volts DC
Warranty: Lifetime
Cancer and Reproductive Harm - www.P65Warnings.ca.gov