ICOM Black Box VHF w/White Command Mic & 3 Command Mic Ports M510BB GW 21

$799.99

M510BB GW 21

This item qualifies for FREE Shipping

Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.

  • Clean Installation for Limited Helm Space: The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation.

  • CommandMic™ Stations: Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.

  • AIS Receive: The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).

  • DSC Functionality and Remote Control: In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.

  • NMEA200® and NMEA 0183-HS®: The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.

  • Class D DSC Functionality: On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

  • Loud One-Way RX Hailer: The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker.

  • Active Noise Cancelling: The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.

Features:

  • AquaQuake™ function

  • Anchor watch function

Specifics:

  • Command Mic Color: White

  • Remote Stations: Up to 3

  • Output Power: 25W

  • GPS: Internal GPS GNSS Receiver, with external GPS antenna connection

  • NMEA: NMEA 2000®/ NMEA 0183® -HS

  • Waterproof Rating: IPX7

  • Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz

  • Usable Channels: USA, INT, CAN, WX channels

  • Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*

  • Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground)

  • Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer)

  • Operating Temperature Range: –20°C-60°C /  –4°F-140°F

  • Antenna Impedance: 50 Ω nominal

  • Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in.

  • Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz

Transmitter Specifics:

  • Output Power (at 13.8V DC):  25 W, 1 W (high, low)

  • Max. Frequency Deviation: +/- 5 kHz

  • Frequency Tolerance: +/- 0.5 kHz

  • Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power)

  • Residual Modulation: More than 40 dB

  • Adjacent Channel Power: More than 70 dB

Receiver Specifics: 

  • Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical

  • Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf

  • Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf

  • Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf

  • Hum and Noise: More than 40 dB

  • Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

Suncoast Marine and Auto is a Trusted Authorized Dealer

California: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Quantity:
Add To Cart

M510BB GW 21

This item qualifies for FREE Shipping

Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.

  • Clean Installation for Limited Helm Space: The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation.

  • CommandMic™ Stations: Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.

  • AIS Receive: The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).

  • DSC Functionality and Remote Control: In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.

  • NMEA200® and NMEA 0183-HS®: The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.

  • Class D DSC Functionality: On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

  • Loud One-Way RX Hailer: The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker.

  • Active Noise Cancelling: The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.

Features:

  • AquaQuake™ function

  • Anchor watch function

Specifics:

  • Command Mic Color: White

  • Remote Stations: Up to 3

  • Output Power: 25W

  • GPS: Internal GPS GNSS Receiver, with external GPS antenna connection

  • NMEA: NMEA 2000®/ NMEA 0183® -HS

  • Waterproof Rating: IPX7

  • Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz

  • Usable Channels: USA, INT, CAN, WX channels

  • Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*

  • Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground)

  • Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer)

  • Operating Temperature Range: –20°C-60°C /  –4°F-140°F

  • Antenna Impedance: 50 Ω nominal

  • Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in.

  • Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz

Transmitter Specifics:

  • Output Power (at 13.8V DC):  25 W, 1 W (high, low)

  • Max. Frequency Deviation: +/- 5 kHz

  • Frequency Tolerance: +/- 0.5 kHz

  • Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power)

  • Residual Modulation: More than 40 dB

  • Adjacent Channel Power: More than 70 dB

Receiver Specifics: 

  • Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical

  • Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf

  • Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf

  • Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf

  • Hum and Noise: More than 40 dB

  • Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

Suncoast Marine and Auto is a Trusted Authorized Dealer

California: Cancer and Reproductive Harm www.P65Warnings.ca.gov

M510BB GW 21

This item qualifies for FREE Shipping

Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied white CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.

  • Clean Installation for Limited Helm Space: The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation.

  • CommandMic™ Stations: Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.

  • AIS Receive: The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).

  • DSC Functionality and Remote Control: In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.

  • NMEA200® and NMEA 0183-HS®: The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.

  • Class D DSC Functionality: On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.

  • Loud One-Way RX Hailer: The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker.

  • Active Noise Cancelling: The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.

Features:

  • AquaQuake™ function

  • Anchor watch function

Specifics:

  • Command Mic Color: White

  • Remote Stations: Up to 3

  • Output Power: 25W

  • GPS: Internal GPS GNSS Receiver, with external GPS antenna connection

  • NMEA: NMEA 2000®/ NMEA 0183® -HS

  • Waterproof Rating: IPX7

  • Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz

  • Usable Channels: USA, INT, CAN, WX channels

  • Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*

  • Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground)

  • Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer)

  • Operating Temperature Range: –20°C-60°C /  –4°F-140°F

  • Antenna Impedance: 50 Ω nominal

  • Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in.

  • Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz

Transmitter Specifics:

  • Output Power (at 13.8V DC):  25 W, 1 W (high, low)

  • Max. Frequency Deviation: +/- 5 kHz

  • Frequency Tolerance: +/- 0.5 kHz

  • Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power)

  • Residual Modulation: More than 40 dB

  • Adjacent Channel Power: More than 70 dB

Receiver Specifics: 

  • Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical

  • Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf

  • Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf

  • Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf

  • Hum and Noise: More than 40 dB

  • Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)

Suncoast Marine and Auto is a Trusted Authorized Dealer

California: Cancer and Reproductive Harm www.P65Warnings.ca.gov

ICOM M330G Class D DSC VHF Radio with GPS M330G BLACK
$224.99
ICOM M605 Fixed Mount VHF Radio with Color Display and Rear Mic Connector M605 31
$849.95
ICOM CommandMic™ IV Microphone, Black HM195GB 61 EXP
$219.95
ICOM M37 Floating 6 Watt Handheld VHF Radio M37 31
$199.95
ICOM M510 EVO VHF w/AIS & NMEA 2000 M510 PLUS EVO 51
$949.99