JABSCO Oil Change Pump, 12V
Mfg # 17830-0012
Model # 6613558
Ships from Vendor. Allow 1-2 weeks for Delivery.
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
Pump Body: Bronze
Port Size: 3/8" NPT
Impeller: Nitrile
Shaft Seal: Buna Lip Type
Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
Details:
Amperage: 10 Amps at 12 Volts
Capacity: 25.2 Quarts per Minute
Dimensions: 4 7/16" x 3 3/4" x 7 7/8"
Portability: Installed
Reverse Cycle: Reverse Cycle
Type: Oil Changers
California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 17830-0012
Model # 6613558
Ships from Vendor. Allow 1-2 weeks for Delivery.
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
Pump Body: Bronze
Port Size: 3/8" NPT
Impeller: Nitrile
Shaft Seal: Buna Lip Type
Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
Details:
Amperage: 10 Amps at 12 Volts
Capacity: 25.2 Quarts per Minute
Dimensions: 4 7/16" x 3 3/4" x 7 7/8"
Portability: Installed
Reverse Cycle: Reverse Cycle
Type: Oil Changers
California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Mfg # 17830-0012
Model # 6613558
Ships from Vendor. Allow 1-2 weeks for Delivery.
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
Pump Body: Bronze
Port Size: 3/8" NPT
Impeller: Nitrile
Shaft Seal: Buna Lip Type
Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
Details:
Amperage: 10 Amps at 12 Volts
Capacity: 25.2 Quarts per Minute
Dimensions: 4 7/16" x 3 3/4" x 7 7/8"
Portability: Installed
Reverse Cycle: Reverse Cycle
Type: Oil Changers
California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
