JL AUDIO M600/6 Full-Range Marine Amplifier

Sale Price:$749.99 Original Price:$799.99
sale

Mfg # 98272

Model # 11835410

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its six channels.

NexD™ Technology: The breakthrough that makes this much power possible in such a small chassis is JL Audio's NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Combine with a subwoofer amp: With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200W each, plus a pair of satellites with 75W x 2.

Filters: The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

Remote control: With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

Built for the marine environment: This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Features:

  • NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs

  • JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events

  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)

  • Signal/Noise Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Signal/Noise Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Damping Factor @ 4 Ω: >150 / 50 Hz

  • Damping Factor @ 2 Ω: >75 / 50 Hz

  • Total Harmonic Distortion + Noise @ Rated Power: <1% @ 2 Ω per Ch.

  • Input Voltage Range @ RCA Inputs: 100 mV - 4 V RMS

  • Min. Copper Power / Ground Wire Gauge: 4 AWG wire

  • Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)

  • Filter Mode(s): Low-Pass or High-Pass

  • Filter Slope(s): 12 dB/octave

  • Filter Frequency Range: 50 Hz - 500 Hz

  • Detented, Calibrated Filter Freq. Potentiometers: Yes

  • Filter Defeat Function: Yes

  • Remote Level Control: Optional (HD-RLC)

  • Remote Level Modes: 2 or 4 or all channels

  • Channel Input Mode Switch: Yes (2/4/6 ch.)

  • Pass-Through Preamp Output: Buffered

  • Source Channel Selection for PreOuts: Yes

Details:

  • Dimensions: 10 1/4" Width x 2 1/16" Height x 7 1/8" Length

  • Type: 6 Channel

  • Warranty: 2 Years

  • Wattage: 600 Watts

Cancer and Reproductive Harm www.P65Warnings.ca.gov

Quantity:
Add To Cart

Mfg # 98272

Model # 11835410

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its six channels.

NexD™ Technology: The breakthrough that makes this much power possible in such a small chassis is JL Audio's NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Combine with a subwoofer amp: With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200W each, plus a pair of satellites with 75W x 2.

Filters: The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

Remote control: With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

Built for the marine environment: This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Features:

  • NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs

  • JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events

  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)

  • Signal/Noise Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Signal/Noise Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Damping Factor @ 4 Ω: >150 / 50 Hz

  • Damping Factor @ 2 Ω: >75 / 50 Hz

  • Total Harmonic Distortion + Noise @ Rated Power: <1% @ 2 Ω per Ch.

  • Input Voltage Range @ RCA Inputs: 100 mV - 4 V RMS

  • Min. Copper Power / Ground Wire Gauge: 4 AWG wire

  • Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)

  • Filter Mode(s): Low-Pass or High-Pass

  • Filter Slope(s): 12 dB/octave

  • Filter Frequency Range: 50 Hz - 500 Hz

  • Detented, Calibrated Filter Freq. Potentiometers: Yes

  • Filter Defeat Function: Yes

  • Remote Level Control: Optional (HD-RLC)

  • Remote Level Modes: 2 or 4 or all channels

  • Channel Input Mode Switch: Yes (2/4/6 ch.)

  • Pass-Through Preamp Output: Buffered

  • Source Channel Selection for PreOuts: Yes

Details:

  • Dimensions: 10 1/4" Width x 2 1/16" Height x 7 1/8" Length

  • Type: 6 Channel

  • Warranty: 2 Years

  • Wattage: 600 Watts

Cancer and Reproductive Harm www.P65Warnings.ca.gov

Mfg # 98272

Model # 11835410

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its six channels.

NexD™ Technology: The breakthrough that makes this much power possible in such a small chassis is JL Audio's NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Combine with a subwoofer amp: With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200W each, plus a pair of satellites with 75W x 2.

Filters: The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

Remote control: With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

Built for the marine environment: This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Features:

  • NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs

  • JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events

  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)

  • Signal/Noise Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Signal/Noise Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

  • Damping Factor @ 4 Ω: >150 / 50 Hz

  • Damping Factor @ 2 Ω: >75 / 50 Hz

  • Total Harmonic Distortion + Noise @ Rated Power: <1% @ 2 Ω per Ch.

  • Input Voltage Range @ RCA Inputs: 100 mV - 4 V RMS

  • Min. Copper Power / Ground Wire Gauge: 4 AWG wire

  • Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)

  • Filter Mode(s): Low-Pass or High-Pass

  • Filter Slope(s): 12 dB/octave

  • Filter Frequency Range: 50 Hz - 500 Hz

  • Detented, Calibrated Filter Freq. Potentiometers: Yes

  • Filter Defeat Function: Yes

  • Remote Level Control: Optional (HD-RLC)

  • Remote Level Modes: 2 or 4 or all channels

  • Channel Input Mode Switch: Yes (2/4/6 ch.)

  • Pass-Through Preamp Output: Buffered

  • Source Channel Selection for PreOuts: Yes

Details:

  • Dimensions: 10 1/4" Width x 2 1/16" Height x 7 1/8" Length

  • Type: 6 Channel

  • Warranty: 2 Years

  • Wattage: 600 Watts

Cancer and Reproductive Harm www.P65Warnings.ca.gov

FUSION Signature Series 3i 8.8" 330 Watt Coaxial Classic White Marine Speakers (Sold as Pair)
Sale Price:$439.99 Original Price:$489.99
Sold Out
FUSION 6.5” 230 W Sports White Wake Tower Speakers with CRGBW LED Lighting
Sale Price:$629.99 Original Price:$699.99
sale
FUSION SG-FT88SPWC 8.8" 330 Watt Coaxial Wake Tower Sports Speakers, Silver/Chrome Sport Grilles, with White or Blue LED Illumination
Sale Price:$929.99 Original Price:$999.99
Sold Out
FUSION XS Series, XS-FLT652SPB 6.5" 200-Watt Sports Black Marine Wake Tower Speakers
Sale Price:$409.99 Original Price:$449.99
sale
JL AUDIO MHD900/5 Full-Range Marine Amplifier
Sale Price:$1,559.99 Original Price:$1,599.99
sale