PAC AmpPRO 4 Amplifier Integration Interface for 2012+ Ford Vehicles AP4-FD21
AP4-FD21
Your amp will sound better than the factory system: You can make a less-than-ideal factory system actually sound premium by upgrading the weak factory amplifier with a more powerful aftermarket amp. PAC's AmpPRO interface consists of a module and a vehicle-specific T-harness that make the job much easier. Now, you can install an amplifier of your own without losing any of your vehicle's factory audio features like warning chimes, navigation prompts, and Bluetooth functions.
Simple to install: The package's T-harness plugs into the factory radio and vehicle harness. The small module fits behind the dash, converting your radio's speaker outputs into six preamp-level outputs ready for connection to your amp. The factory amplifier needs to be left connected in the vehicle. The factory radio controls, such as volume, balance, and fade, will work as before for your front and rear speakers. A separate wired remote level control lets you adjust the volume of the subwoofer channels from your front seat. An optional add-on module, PAC's APA-TOS1 adapter, provides an optical digital output for your high-end digital processors and amplifiers to handle.
An app for tweakers: After downloading the AmpPRO PC App and connecting to your Windows-run PC via USB, you can access the factory 3-band parametric equalizer (EQ) and customize the tone of your system to perfection. The app also lets you adjust chime volume, the system's minimum volume level, and update the product firmware when needed.
Important Note: This AmpPRO interface simplifies the installation of a car amplifier (not included). You'll also need to purchase anything required to install your new amp: an amp wiring kit, speaker wire (to replace factory wiring), and RCA cables.
Features:
Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
In the Box:
Amplifier integration interface module
T-harness
6' Rotary-knob cable
Rotary-knob
Installation Instructions
Warranty: Manufacturer
Suncoast Marine and Auto is a Trusted Authorized Dealer
California: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
AP4-FD21
Your amp will sound better than the factory system: You can make a less-than-ideal factory system actually sound premium by upgrading the weak factory amplifier with a more powerful aftermarket amp. PAC's AmpPRO interface consists of a module and a vehicle-specific T-harness that make the job much easier. Now, you can install an amplifier of your own without losing any of your vehicle's factory audio features like warning chimes, navigation prompts, and Bluetooth functions.
Simple to install: The package's T-harness plugs into the factory radio and vehicle harness. The small module fits behind the dash, converting your radio's speaker outputs into six preamp-level outputs ready for connection to your amp. The factory amplifier needs to be left connected in the vehicle. The factory radio controls, such as volume, balance, and fade, will work as before for your front and rear speakers. A separate wired remote level control lets you adjust the volume of the subwoofer channels from your front seat. An optional add-on module, PAC's APA-TOS1 adapter, provides an optical digital output for your high-end digital processors and amplifiers to handle.
An app for tweakers: After downloading the AmpPRO PC App and connecting to your Windows-run PC via USB, you can access the factory 3-band parametric equalizer (EQ) and customize the tone of your system to perfection. The app also lets you adjust chime volume, the system's minimum volume level, and update the product firmware when needed.
Important Note: This AmpPRO interface simplifies the installation of a car amplifier (not included). You'll also need to purchase anything required to install your new amp: an amp wiring kit, speaker wire (to replace factory wiring), and RCA cables.
Features:
Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
In the Box:
Amplifier integration interface module
T-harness
6' Rotary-knob cable
Rotary-knob
Installation Instructions
Warranty: Manufacturer
Suncoast Marine and Auto is a Trusted Authorized Dealer
California: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
AP4-FD21
Your amp will sound better than the factory system: You can make a less-than-ideal factory system actually sound premium by upgrading the weak factory amplifier with a more powerful aftermarket amp. PAC's AmpPRO interface consists of a module and a vehicle-specific T-harness that make the job much easier. Now, you can install an amplifier of your own without losing any of your vehicle's factory audio features like warning chimes, navigation prompts, and Bluetooth functions.
Simple to install: The package's T-harness plugs into the factory radio and vehicle harness. The small module fits behind the dash, converting your radio's speaker outputs into six preamp-level outputs ready for connection to your amp. The factory amplifier needs to be left connected in the vehicle. The factory radio controls, such as volume, balance, and fade, will work as before for your front and rear speakers. A separate wired remote level control lets you adjust the volume of the subwoofer channels from your front seat. An optional add-on module, PAC's APA-TOS1 adapter, provides an optical digital output for your high-end digital processors and amplifiers to handle.
An app for tweakers: After downloading the AmpPRO PC App and connecting to your Windows-run PC via USB, you can access the factory 3-band parametric equalizer (EQ) and customize the tone of your system to perfection. The app also lets you adjust chime volume, the system's minimum volume level, and update the product firmware when needed.
Important Note: This AmpPRO interface simplifies the installation of a car amplifier (not included). You'll also need to purchase anything required to install your new amp: an amp wiring kit, speaker wire (to replace factory wiring), and RCA cables.
Features:
Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
In the Box:
Amplifier integration interface module
T-harness
6' Rotary-knob cable
Rotary-knob
Installation Instructions
Warranty: Manufacturer
Suncoast Marine and Auto is a Trusted Authorized Dealer
California: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
