C2R-FRD1

Provides navigation trigger wires and timed accessory output for replacing the factory radio. Retains the factory-installed amplified audio system and rear-seat entertainment (if equipped). Use a steering wheel interface module to retain the function of all factory controls.

Data controlled:

• RAP accessory output wire

• Reverse trigger wire

• Illumination output wire

• Parking brake wire

• Vehicle speed sense wire

Retains:

• Factory 3.5mm jack if equipped

• Rear seat entertainment and dual-zone audio

• Factory-installed amplified audio system

• Single wire output for steering wheel control module

Compatibility:

• Does not retain SYNC. SYNC retention requires the MS-FRD1

• Does not retain steering wheel controls in 2011+ F-series trucks. These vehicles must use the RP4-FD11 for steering wheel control retention.

Vehicle Specific Notes:

• 2008 F-250/350/450: Not compatible with model trim XL (fleet vehicles). These vehicles do not have the necessary CAN bus signals

• 2006-2007 Ford Freestyle: Does not retain RSE

Suncoast Marine and Auto is a Trusted Authorized Dealer

California: Cancer and Reproductive Harm – www.P65Warnings.ca.gov