POLY MARINE 1-Part PVC Inflatable Boat Adhesive, 70mL Tube
Mfg # 354434
Model # 492556
High-strength patching glue or adhesive. Choose between one-part or two-part formulas for Hypalon or PVC.
Single-part adhesives are good for temporary repairs. For a permanent repair with the maximum of strength, use the two-part products.
Single-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC nylon fabric, polyurethane fabric and foam. Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
Includes: 70ml tube
Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
Pot Life: 3-4 hours
Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
Coverage: Using two coats, 1 liter bonds 1 square meter
Apply With: Brush or roller
Mfg # 354434
Model # 492556
High-strength patching glue or adhesive. Choose between one-part or two-part formulas for Hypalon or PVC.
Single-part adhesives are good for temporary repairs. For a permanent repair with the maximum of strength, use the two-part products.
Single-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC nylon fabric, polyurethane fabric and foam. Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
Includes: 70ml tube
Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
Pot Life: 3-4 hours
Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
Coverage: Using two coats, 1 liter bonds 1 square meter
Apply With: Brush or roller
Mfg # 354434
Model # 492556
High-strength patching glue or adhesive. Choose between one-part or two-part formulas for Hypalon or PVC.
Single-part adhesives are good for temporary repairs. For a permanent repair with the maximum of strength, use the two-part products.
Single-Part PVC Adhesive
Solvent based polyurethane adhesive giving excellent adhesion to both plasticized and unplasticized PVC nylon fabric, polyurethane fabric and foam. Note: For a complete bond 2903 solvent must be used before the adhesive is applied.
Includes: 70ml tube
Will bond: PVC inflatables including Zodiac/Bombard “Dynalon” and “Strongon” fabrics and Narwhal/Valiant “Hypertex”
Pot Life: 3-4 hours
Curing Time: Contact bonds in 10-15 minutes, full cure 48 hours
Coverage: Using two coats, 1 liter bonds 1 square meter
Apply With: Brush or roller
