RULE INDUSTRIES Self-Priming Dry Bilge Pump with On/Off Switch, 12V

$274.99

Mfg # DB412

Model # 20196275

RULE INDUSTRIES Self-Priming Dry Bilge Pump with On/Off Switch

The number one question from Boaters at Boat Shows is "How do I get the last bit of water out of my bilge?" Rule now provides the answer. 

A Dry Bilge is a clean, odorless bilge. Rule now offers the best, most effective method of removing almost all of the water in your bilge, leaving 1/8” or less, keeping your bilge fresh, clean, and dry. The 4 GPM pump drains the bilge almost dry.

The filter-free design is self-priming to 9.5' (3 m). It is able to run dry without damaging the pump. The backflow protection reduces water coming back into the bilge. The connections are 3/4" (19 mm) hose barbs for the pickup and discharge hoses.

Rotating pump head and ports allow for custom configuration. Compact and simple design. A 90° thru-hull fitting and a Dry Bilge on/off panel switch is included in the box. Hose and clamps needed to complete the installation not included.

Features:

  • 4 GPM Pump draws down to less than 1/8"

  • Filterless design; able to evacuate bilge water and odor

  • Self primes to 9.5' (3m) lift

  • Runs dry without damage

  • Rotating head and ports allow custom configuration

  • 12 Volt

Details:

  • Activation Method: Electric Non-Automatic

  • Amperage: 8

  • Capacity: 4 Gallons per minute

  • Diameter: 3/4 Inch

  • Voltage: 12V DC

California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity:
Add To Cart

Mfg # DB412

Model # 20196275

RULE INDUSTRIES Self-Priming Dry Bilge Pump with On/Off Switch

The number one question from Boaters at Boat Shows is "How do I get the last bit of water out of my bilge?" Rule now provides the answer. 

A Dry Bilge is a clean, odorless bilge. Rule now offers the best, most effective method of removing almost all of the water in your bilge, leaving 1/8” or less, keeping your bilge fresh, clean, and dry. The 4 GPM pump drains the bilge almost dry.

The filter-free design is self-priming to 9.5' (3 m). It is able to run dry without damaging the pump. The backflow protection reduces water coming back into the bilge. The connections are 3/4" (19 mm) hose barbs for the pickup and discharge hoses.

Rotating pump head and ports allow for custom configuration. Compact and simple design. A 90° thru-hull fitting and a Dry Bilge on/off panel switch is included in the box. Hose and clamps needed to complete the installation not included.

Features:

  • 4 GPM Pump draws down to less than 1/8"

  • Filterless design; able to evacuate bilge water and odor

  • Self primes to 9.5' (3m) lift

  • Runs dry without damage

  • Rotating head and ports allow custom configuration

  • 12 Volt

Details:

  • Activation Method: Electric Non-Automatic

  • Amperage: 8

  • Capacity: 4 Gallons per minute

  • Diameter: 3/4 Inch

  • Voltage: 12V DC

California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Mfg # DB412

Model # 20196275

RULE INDUSTRIES Self-Priming Dry Bilge Pump with On/Off Switch

The number one question from Boaters at Boat Shows is "How do I get the last bit of water out of my bilge?" Rule now provides the answer. 

A Dry Bilge is a clean, odorless bilge. Rule now offers the best, most effective method of removing almost all of the water in your bilge, leaving 1/8” or less, keeping your bilge fresh, clean, and dry. The 4 GPM pump drains the bilge almost dry.

The filter-free design is self-priming to 9.5' (3 m). It is able to run dry without damaging the pump. The backflow protection reduces water coming back into the bilge. The connections are 3/4" (19 mm) hose barbs for the pickup and discharge hoses.

Rotating pump head and ports allow for custom configuration. Compact and simple design. A 90° thru-hull fitting and a Dry Bilge on/off panel switch is included in the box. Hose and clamps needed to complete the installation not included.

Features:

  • 4 GPM Pump draws down to less than 1/8"

  • Filterless design; able to evacuate bilge water and odor

  • Self primes to 9.5' (3m) lift

  • Runs dry without damage

  • Rotating head and ports allow custom configuration

  • 12 Volt

Details:

  • Activation Method: Electric Non-Automatic

  • Amperage: 8

  • Capacity: 4 Gallons per minute

  • Diameter: 3/4 Inch

  • Voltage: 12V DC

California: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RULE INDUSTRIES 2000 GPH Electric Bilge Pump, 24V
$184.99
SHURFLO Oil Change Unit
$245.99
RULE INDUSTRIES 900 GPH Low Profile Electric Bilge Pump
$92.99
REVERSO GP-301 1.5 gpm Gear Oil Pump, 12V
$399.99
RULE INDUSTRIES 4000 GPH Submersible Electric Bilge Pump, 24V
Sale Price:$289.99 Original Price:$324.99
sale