WEST MARINE Dual-Purpose AGM Battery, 190 Amp Hours, 6V, Group GC2
Mfg # WM8AGC2
Model # 15020282
Replace your flooded batteries with Absorbed Glass Mat (AGM) batteries. They’re more rugged, accept higher charging current, are sealed, safer and submersible.
AGM Batteries are great in both deep cycle and starting applications. They charge more quickly than conventional batteries and have low 3% monthly self-discharge rates. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Dual Purpose batteries deliver high starting and moderate deep cycle power; Ideal for boaters who want high cranking power plus dependable power for power-hungry electronic accessories
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Manufactured in the USA
Rated at 300 cycles
Specifications
Group Size: Group GC2 (6V)
Terminal Type: Combination molded-in offset SAE post and vertical 5/16" Negative, 5/16" Positive stainless steel studs and hex nuts
Amp Hours (Ah): 190
Reserve Minutes: 480
Weight: 70 lbs.
Dimensions: 10 1/4"L x 7 1/8"W x10 7/8"H
Core charge will apply to battery purchase if an old 6V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Dual Purpose
Cold Cranking Amps: 680 CCA
Marine Cranking Amps: 900 MCA
Reserve Minutes: 380
Type: Tapered Stud and Wing Nuts
Voltage: 6 Volts DC
Warranty: 18 Months Free Replacement
Mfg # WM8AGC2
Model # 15020282
Replace your flooded batteries with Absorbed Glass Mat (AGM) batteries. They’re more rugged, accept higher charging current, are sealed, safer and submersible.
AGM Batteries are great in both deep cycle and starting applications. They charge more quickly than conventional batteries and have low 3% monthly self-discharge rates. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Dual Purpose batteries deliver high starting and moderate deep cycle power; Ideal for boaters who want high cranking power plus dependable power for power-hungry electronic accessories
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Manufactured in the USA
Rated at 300 cycles
Specifications
Group Size: Group GC2 (6V)
Terminal Type: Combination molded-in offset SAE post and vertical 5/16" Negative, 5/16" Positive stainless steel studs and hex nuts
Amp Hours (Ah): 190
Reserve Minutes: 480
Weight: 70 lbs.
Dimensions: 10 1/4"L x 7 1/8"W x10 7/8"H
Core charge will apply to battery purchase if an old 6V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Dual Purpose
Cold Cranking Amps: 680 CCA
Marine Cranking Amps: 900 MCA
Reserve Minutes: 380
Type: Tapered Stud and Wing Nuts
Voltage: 6 Volts DC
Warranty: 18 Months Free Replacement
Mfg # WM8AGC2
Model # 15020282
Replace your flooded batteries with Absorbed Glass Mat (AGM) batteries. They’re more rugged, accept higher charging current, are sealed, safer and submersible.
AGM Batteries are great in both deep cycle and starting applications. They charge more quickly than conventional batteries and have low 3% monthly self-discharge rates. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Dual Purpose batteries deliver high starting and moderate deep cycle power; Ideal for boaters who want high cranking power plus dependable power for power-hungry electronic accessories
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Manufactured in the USA
Rated at 300 cycles
Specifications
Group Size: Group GC2 (6V)
Terminal Type: Combination molded-in offset SAE post and vertical 5/16" Negative, 5/16" Positive stainless steel studs and hex nuts
Amp Hours (Ah): 190
Reserve Minutes: 480
Weight: 70 lbs.
Dimensions: 10 1/4"L x 7 1/8"W x10 7/8"H
Core charge will apply to battery purchase if an old 6V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Dual Purpose
Cold Cranking Amps: 680 CCA
Marine Cranking Amps: 900 MCA
Reserve Minutes: 380
Type: Tapered Stud and Wing Nuts
Voltage: 6 Volts DC
Warranty: 18 Months Free Replacement
