WEST MARINE High Cranking Power AGM Battery
Mfg # WM9A34M
Model # 15020175
High craning power in a durable and maintenance free AGM battery
AGM (absorbed glass mat) batteries are great in starting applications. They charge more quickly than conventional batteries, have low 3% monthly self-discharge rates and are maintenance-free—no need to add water. Because of the absorbed glass mat design these batteries are more vibration resistant; they will take more wave-pounding than a conventional battery. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Rated at 300 cycles
Manufactured in the USA
Specifics:
Group Size: Group 34
Terminal Type: Molded-in offset SAE post and vertical 5/16" NEG., 5/16" POS. stainless steel studs and hex nuts
Amp Hours (Ah): 55
Cold Cranking Amps (CCA): 775
Marine Cranking Amps (MCA): 890
Reserve Minutes: 120
Weight: 421/2lbs.
Dimensions: 10 3/4"L x 6 7/8"W x 8 3/8"H
Core charge will apply to battery purchase if an old 12V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Starting
Cold Cranking Amps: 775 CCA
Type: Tapered Stud
Voltage: 12 Volts DC
Warranty: 18 Months Free Replacement
Cancer and Reproductive Harm www.P65Warnings.ca.gov
Mfg # WM9A34M
Model # 15020175
High craning power in a durable and maintenance free AGM battery
AGM (absorbed glass mat) batteries are great in starting applications. They charge more quickly than conventional batteries, have low 3% monthly self-discharge rates and are maintenance-free—no need to add water. Because of the absorbed glass mat design these batteries are more vibration resistant; they will take more wave-pounding than a conventional battery. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Rated at 300 cycles
Manufactured in the USA
Specifics:
Group Size: Group 34
Terminal Type: Molded-in offset SAE post and vertical 5/16" NEG., 5/16" POS. stainless steel studs and hex nuts
Amp Hours (Ah): 55
Cold Cranking Amps (CCA): 775
Marine Cranking Amps (MCA): 890
Reserve Minutes: 120
Weight: 421/2lbs.
Dimensions: 10 3/4"L x 6 7/8"W x 8 3/8"H
Core charge will apply to battery purchase if an old 12V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Starting
Cold Cranking Amps: 775 CCA
Type: Tapered Stud
Voltage: 12 Volts DC
Warranty: 18 Months Free Replacement
Cancer and Reproductive Harm www.P65Warnings.ca.gov
Mfg # WM9A34M
Model # 15020175
High craning power in a durable and maintenance free AGM battery
AGM (absorbed glass mat) batteries are great in starting applications. They charge more quickly than conventional batteries, have low 3% monthly self-discharge rates and are maintenance-free—no need to add water. Because of the absorbed glass mat design these batteries are more vibration resistant; they will take more wave-pounding than a conventional battery. The spill-proof, valve-regulated design eliminates acid spills and terminal corrosion. AGM batteries are safer to operate than conventional flooded batteries, as the chance of explosion or acid spray is reduced which allow them to be installed in almost any location and any position (except upside-down).
Manufactured in the U.S. for West Marine by East Penn, one of the most reputable battery companies in the country. Each battery receives over 250 quality control checks to guarantee consistent and superior performance. East Penn’s award winning factory leads the industry in closed loop and sustainable practices. Nearly all of the plastics, lead and acid are recycled, so our batteries are great for your boat and the environment.
Features:
Shock-absorbing glass mat separators resist vibration and damage that can shorten the life of a battery; 20 times more vibration resistant than flooded batteries for wave-pounding protection
Enhanced durability design to withstand wear of extended cycling service
Superior electrolyte retention prevents dry out and acid leaks
Safer to install and transport with no-spill design to prevent leaking acid
Lower current resistance separators improve current flow for faster starts
Rated at 300 cycles
Manufactured in the USA
Specifics:
Group Size: Group 34
Terminal Type: Molded-in offset SAE post and vertical 5/16" NEG., 5/16" POS. stainless steel studs and hex nuts
Amp Hours (Ah): 55
Cold Cranking Amps (CCA): 775
Marine Cranking Amps (MCA): 890
Reserve Minutes: 120
Weight: 421/2lbs.
Dimensions: 10 3/4"L x 6 7/8"W x 8 3/8"H
Core charge will apply to battery purchase if an old 12V battery is not exchanged at the time of purchase.
Details:
Battery Type: Sealed, AGM, Dual Purpose
Best Use: Starting
Cold Cranking Amps: 775 CCA
Type: Tapered Stud
Voltage: 12 Volts DC
Warranty: 18 Months Free Replacement
Cancer and Reproductive Harm www.P65Warnings.ca.gov
